经济代写|微观经济学代考Microeconomics代写|BEA470 Profit Maximum

如果你也在 怎样代写微观经济学Microeconomics BEA470这个学科遇到相关的难题,请随时右上角联系我们的24/7代写客服。微观经济学Microeconomics是主流经济学的一个分支,研究个人和公司在做出有关稀缺资源分配的决策时的行为以及这些个人和公司之间的互动。微观经济学侧重于研究单个市场、部门或行业,而不是宏观经济学所研究的整个国民经济。

微观经济学Microeconomic的一个目标是分析在商品和服务之间建立相对价格的市场机制,并在各种用途之间分配有限资源。微观经济学显示了自由市场导致理想分配的条件。它还分析了市场失灵,即市场未能产生有效的结果。微观经济学关注公司和个人,而宏观经济学则关注经济活动的总和,处理增长、通货膨胀和失业问题以及与这些问题有关的国家政策。微观经济学还处理经济政策(如改变税收水平)对微观经济行为的影响,从而对经济的上述方面产生影响。

同学们在留学期间,都对各式各样的作业考试很是头疼,如果你无从下手,不如考虑my-assignmentexpert™!

my-assignmentexpert™提供最专业的一站式服务:Essay代写,Dissertation代写,Assignment代写,Paper代写,Proposal代写,Proposal代写,Literature Review代写,Online Course,Exam代考等等。my-assignmentexpert™专注为留学生提供Essay代写服务,拥有各个专业的博硕教师团队帮您代写,免费修改及辅导,保证成果完成的效率和质量。同时有多家检测平台帐号,包括Turnitin高级账户,检测论文不会留痕,写好后检测修改,放心可靠,经得起任何考验!

想知道您作业确定的价格吗? 免费下单以相关学科的专家能了解具体的要求之后在1-3个小时就提出价格。专家的 报价比上列的价格能便宜好几倍。

我们在经济Economy代写方面已经树立了自己的口碑, 保证靠谱, 高质且原创的经济Economy代写服务。我们的专家在微观经济学Microeconomics代写方面经验极为丰富,各种微观经济学Microeconomics相关的作业也就用不着 说。

经济代写|微观经济学代考Microeconomics代写|BEA470 Profit Maximum

经济代写|微观经济学代考Microeconomics代写|Profit Maximum

The monopolist wants to maximize her profit. She does that by producing the quantity, $Q^*$, at which $M C=M R$ :

$$
M C\left(Q^\right)=M R\left(Q^\right)
$$
In Figure 11.1, this corresponds to the quantity 7.5 , where both MR and MC equal 15. To see that this choice maximizes the profit, think of what would happen if she would produce more than that quantity. If she would produce one more unit, she would get paid MR but also incur a cost of MC. Moreover, since $\mathrm{MC}>\mathrm{MR}$, the cost is larger than the revenue and she would reduce profit; similarly if she would reduce the production.

The profit at a quantity of 7.5 is, according to the lower diagram, 82.5. The price the monopolist will charge is the one that the consumers, according to the demand curve, are prepared to pay when the total production is 7.5, i.e. 22.50 . The corresponding ATC is 11.50. In other words, the monopolist makes $22.50-11.50=11$ per unit sold, totaling to $11 * 7.5=82.5$. This corresponds to the grey rectangle in the upper part of the figure.

Similarly to the firms in a perfectly competitive market (see Section 9.3.2), the price must also be above the average variable cost, AVC. If it is not, it is better to produce nothing at all. In the long run, the firm must also cover its fixed cost, and then the price must be above the average total cost, ATC.

经济代写|微观经济学代考Microeconomics代写|The Deadweight Loss of a Monopoly

To have a monopoly firm is often very beneficial for the monopolist, who can make a profit, but it is negative for society. To see why, look at point a in the upper part of Figure 11.1. In that point $\mathrm{MC}=\mathrm{D}$. The marginal cost is the cost of the last produced unit, and the demand is the consumers’ corresponding valuation of that unit. At point a, the cost of producing the last unit and the valuation of that unit are the same. To the left of that point, the consumers’ valuation is higher than the cost of producing additional units. Society therefore loses production of goods that cost less than what they are worth, according to the consumers’ valuation. Then the quantity that the monopolist produces cannot be efficient. The deadweight loss that arises corresponds to the dark grey triangle in the figure. (Compare to Section 10.1.)

Let us look closer at the consequences. In Figure 11.2, we have drawn the supply curve, i.e. the MC curve. (Remember from Section 9.3.3 that the supply curve of a firm corresponds to the part of the MC curve that is above the average cost.) Furthermore, we have drawn the demand curve, D, and the marginal revenue curve, MR. Under perfect competition, equilibrium had been reached at the price $\mathrm{p}{\mathrm{C}}$ and the quantity $\mathrm{Q}{\mathrm{C}}$, but in a monopoly market, equilibrium is reached at the price $\mathrm{p}{\mathrm{M}}$ and the quantity $\mathrm{Q}{\mathrm{M}}$. The producer surplus (PS) in a monopoly market corresponds to the area $\mathrm{B}+\mathrm{D}$, and the consumer surplus (CS) corresponds to the area $\mathrm{A}$. The social surplus will therefore be $\mathrm{A}+\mathrm{B}+\mathrm{D}$. If the market had been perfectly competitive instead, $P S$ had been $D+E$ while $\mathrm{CS}$ had been $\mathrm{A}+\mathrm{B}+\mathrm{C}$ and the social surplus $\mathrm{A}+\mathrm{B}+\mathrm{C}+\mathrm{D}+\mathrm{E}$.

In other words, society, particularly the consumers, loses utility: The deadweight loss is $\mathrm{C}+\mathrm{E}$. The monopolist, on the other hand, will lose if competition is increased. Note that the monopoly is not efficient (see Section 18.2): It would have been possible to produce the quantity $\mathrm{Q}{\mathrm{C}}$ to the price $\mathrm{p}{\mathrm{C}}$ and then compensate the firm by transferring the area B back from the consumers. The consumers would still get an increase in utility corresponding to the area $\mathrm{C}$ (they would now get $\mathrm{A}+\mathrm{C}$ ), and the producers would get an increase in utility corresponding to the area $\mathrm{E}$ (they would now get $\mathrm{B}+\mathrm{D}+\mathrm{E}$ ). No group would lose anything. Therefore, the monopoly does not fulfill the Pareto criterion.

经济代写|微观经济学代考Microeconomics代写|BEA470 Profit Maximum

微观经济学代写

经济代写|微观经济学代考MICROECONOMICS代写PROFIT MAXIMUM


塾断者想要最大化她的利润。她通过生产数量来做到这一点, $Q^*$, 在哪个 $M C=M R$ :
在图 11.1 中,这对应于数量 7.5,其中 MR 和 MC 都等于 15。要了解此选择使利润最大化,请想一想如果她生产的数量超过该数量会发生什么。如 果她再生产一个单位,她将获得报酬 MR,但也会产生 $M C$ 成本。此外,由于 $M C>M R$ ,成本大于收入,她会減少利润;同样,如果她减少产 量。
根据下图,数量为 7.5 时的利润为 82.5。根据需求曲线,当总产量为 7.5 ,即 22.50 时,勎断者将收取的价格是消费者准备支付的价格。对应的 ATC 为 11.50 。换言之,坼断者使 $22.50-11.50=11$ 每售出一个单位,总计 $11 * 7.5=82.5$. 这对应于图中上部的灰色矩形。
类似于完全竞争市场中的企业 seeSection 9.3.2,价格也必须高于平均可变成本 AVC。如果不是,最好什么都不生产。从长远来看,企业还必须支 付其固定成本,然后价格必须高于平均总成本 ATC

经济代写|微观经济学代考MICROECONOMICS代写|THE DEADWEIGHT LOSS OF A MONOPOLY


拥有一家厹断企业通常对玏断者非常有利,他们可以获利,但对社会却不利。要了解原因,请查看图 11.1 上部的点 $a$ 。在那一点上 $M C=D$. 边际 成本是最后生产单位的成本,需求是消费者对该单位的相应估价。在 $\mathrm{a}$ 点,生产最后一个单位的成本和那个单位的估值是一样的。在该点的左
侧,消费者的估值高于生产额外单位的成本。因此,根据消费者的估价,社会失去了成本 可能是有效率的。产生的无谓损失对应于图中的深灰色三角形。ComparetoSection 10.1
让我们仔细看看后果。在图11.2中,我们画出了供给曲线,即MC曲线。
Remember fromSection9.3.3thatthesupplycurveofa firmcorrespondstothepartofthe MCcurvethatisabovetheaveragecost. 此外,我 们还绘制了需求曲线 $\mathrm{D}$ 和边际收益曲线MR。在完全菖争下,价恪达到均衡 $\mathrm{pC}$ 和数量 $\mathrm{QC}$, 但在垒断市场中,均衡是在价格上达到的 $\mathrm{pM}$ 和数量 $\mathrm{QM}$
生产者剩余 $P S$ 在㔔断市场对应的区域 $\mathrm{B}+\mathrm{D}$ 和诮费者剩余 $C S$ 对应 $D+E$ 尽管 $\mathrm{CS}$ 曾经是 $\mathrm{A}+\mathrm{B}+\mathrm{C}$ 和社会剩余 $\mathrm{A}+\mathrm{B}+\mathrm{C}+\mathrm{D}+\mathrm{E}$,
换句话说,社会,尤其是消费者,失去了效用: 无谓损失是 $\mathrm{C}+\mathrm{E}$. 另一方面,如果竞争加剧,紸断者就会失败。注意勎断是没有效率的
seeSection 18.2: 本来可以生产的数量QC到价格pC然后通过将区域 $\mathrm{B}$ 从消费者那里转移回来补偿公司。消费者仍然会获得与该区域相对应的效
西。因此,㷱断不满足帕男托准则。

经济代写|微观经济学代考Microeconomics代写

经济代写|微观经济学代考Microeconomics代写 请认准exambang™. exambang™为您的留学生涯保驾护航。

微观经济学代写

微观经济学是主流经济学的一个分支,研究个人和企业在做出有关稀缺资源分配的决策时的行为以及这些个人和企业之间的相互作用。my-assignmentexpert™ 为您的留学生涯保驾护航 在数学Mathematics作业代写方面已经树立了自己的口碑, 保证靠谱, 高质且原创的数学Mathematics代写服务。我们的专家在图论代写Graph Theory代写方面经验极为丰富,各种图论代写Graph Theory相关的作业也就用不着 说。

线性代数代写

线性代数是数学的一个分支,涉及线性方程,如:线性图,如:以及它们在向量空间和通过矩阵的表示。线性代数是几乎所有数学领域的核心。

博弈论代写

现代博弈论始于约翰-冯-诺伊曼(John von Neumann)提出的两人零和博弈中的混合策略均衡的观点及其证明。冯-诺依曼的原始证明使用了关于连续映射到紧凑凸集的布劳威尔定点定理,这成为博弈论和数学经济学的标准方法。在他的论文之后,1944年,他与奥斯卡-莫根斯特恩(Oskar Morgenstern)共同撰写了《游戏和经济行为理论》一书,该书考虑了几个参与者的合作游戏。这本书的第二版提供了预期效用的公理理论,使数理统计学家和经济学家能够处理不确定性下的决策。

微积分代写

微积分,最初被称为无穷小微积分或 “无穷小的微积分”,是对连续变化的数学研究,就像几何学是对形状的研究,而代数是对算术运算的概括研究一样。

它有两个主要分支,微分和积分;微分涉及瞬时变化率和曲线的斜率,而积分涉及数量的累积,以及曲线下或曲线之间的面积。这两个分支通过微积分的基本定理相互联系,它们利用了无限序列和无限级数收敛到一个明确定义的极限的基本概念 。

计量经济学代写

什么是计量经济学?
计量经济学是统计学和数学模型的定量应用,使用数据来发展理论或测试经济学中的现有假设,并根据历史数据预测未来趋势。它对现实世界的数据进行统计试验,然后将结果与被测试的理论进行比较和对比。

根据你是对测试现有理论感兴趣,还是对利用现有数据在这些观察的基础上提出新的假设感兴趣,计量经济学可以细分为两大类:理论和应用。那些经常从事这种实践的人通常被称为计量经济学家。

Matlab代写

MATLAB 是一种用于技术计算的高性能语言。它将计算、可视化和编程集成在一个易于使用的环境中,其中问题和解决方案以熟悉的数学符号表示。典型用途包括:数学和计算算法开发建模、仿真和原型制作数据分析、探索和可视化科学和工程图形应用程序开发,包括图形用户界面构建MATLAB 是一个交互式系统,其基本数据元素是一个不需要维度的数组。这使您可以解决许多技术计算问题,尤其是那些具有矩阵和向量公式的问题,而只需用 C 或 Fortran 等标量非交互式语言编写程序所需的时间的一小部分。MATLAB 名称代表矩阵实验室。MATLAB 最初的编写目的是提供对由 LINPACK 和 EISPACK 项目开发的矩阵软件的轻松访问,这两个项目共同代表了矩阵计算软件的最新技术。MATLAB 经过多年的发展,得到了许多用户的投入。在大学环境中,它是数学、工程和科学入门和高级课程的标准教学工具。在工业领域,MATLAB 是高效研究、开发和分析的首选工具。MATLAB 具有一系列称为工具箱的特定于应用程序的解决方案。对于大多数 MATLAB 用户来说非常重要,工具箱允许您学习应用专业技术。工具箱是 MATLAB 函数(M 文件)的综合集合,可扩展 MATLAB 环境以解决特定类别的问题。可用工具箱的领域包括信号处理、控制系统、神经网络、模糊逻辑、小波、仿真等。

发表评论

您的电子邮箱地址不会被公开。 必填项已用 * 标注