如果你也在 怎样代写会计accounting这个学科遇到相关的难题，请随时右上角联系我们的24/7代写客服。会计accounting是对经济实体，如企业和公司的财务和非财务信息的衡量、处理和交流。会计被称为 “商业语言”，衡量一个组织的经济活动的结果，并将这些信息传达给各种利益相关者，包括投资者、债权人、管理层和监管者。术语 “会计 “和 “财务报告 “经常被当作同义词使用。
会计accounting可以分为几个领域，包括财务会计、管理会计、税务会计和成本会计。财务会计侧重于向信息的外部用户，如投资者、监管者和供应商报告组织的财务信息，包括编制财务报表；而管理会计侧重于测量、分析和报告信息，供管理层内部使用。记录财务交易，以便在财务报告中提出财务摘要，被称为簿记，其中复式簿记是最常见的系统。 会计信息系统旨在支持会计功能和相关活动。
my-assignmentexpert™ 会计accounting作业代写，免费提交作业要求， 满意后付款，成绩80\%以下全额退款，安全省心无顾虑。专业硕 博写手团队，所有订单可靠准时，保证 100% 原创。my-assignmentexpert™， 最高质量的会计accounting作业代写，服务覆盖北美、欧洲、澳洲等 国家。 在代写价格方面，考虑到同学们的经济条件，在保障代写质量的前提下，我们为客户提供最合理的价格。 由于统计Statistics作业种类很多，同时其中的大部分作业在字数上都没有具体要求，因此会计accounting作业代写的价格不固定。通常在经济学专家查看完作业要求之后会给出报价。作业难度和截止日期对价格也有很大的影响。
想知道您作业确定的价格吗? 免费下单以相关学科的专家能了解具体的要求之后在1-3个小时就提出价格。专家的 报价比上列的价格能便宜好几倍。
my-assignmentexpert™ 为您的留学生涯保驾护航 在会计accounting作业代写方面已经树立了自己的口碑, 保证靠谱, 高质且原创的会计accounting代写服务。我们的专家在会计accounting代写方面经验极为丰富，各种会计accounting相关的作业也就用不着 说。
我们提供的会计accounting及其相关学科的代写，服务范围广, 其中包括但不限于:
会计代写|会计作业代写accounting代考|Percentage of New Parts Used in New Products
A continuing problem for a company’s logistics staff is the volume of new parts that the engineering department specifies for each new product. This can result in an extraordinary number of parts to keep track of, which entails additional purchasing and materials handling costs. From the perspective of saving costs for the entire company, it makes a great deal of sense to encourage engineers to design products that share components with existing products. This approach leverages new products from the existing workload of the purchasing and materials handling staffs and has the added benefit of avoiding an investment in new parts inventory. For these reasons, the percentage of new parts used in new products is an excellent choice of performance measurement.
Divide the number of new parts in a bill of materials by the total number of parts in a bill of materials. Many companies may not include fittings and fasteners in the bill of materials, because they keep large quantities of these items on hand at all times and charge them off to current expenses. If so, the number of parts to include in the calculation will usually decline greatly, making the measurement much easier to complete. The formula is as follows:
$\frac{\text { Number of new parts in bill of materials }}{\text { Total number of parts in bill of materials }}$
Engineers may argue against the use of this measurement on the grounds that it provides a disincentive for them to locate more reliable and/or less expensive parts with which to replace existing components. Although this measure can act as a block to such beneficial activities, a measurement system can avoid this problem by also focusing on long-term declines in the cost of products or increases in the level of quality. A combined set of these measurements can be an effective way to focus on the most appropriate design initiatives by the engineering department.
会计代写|会计作业代写accounting代考|Percentage of Existing Parts Reused in New Products
The inverse of the preceding measurement can be used to determine the proportion of existing parts that are used in new products. However, as the formula reveals, this measurement is slightly different from an inverse measurement. Companies that have compiled an approved list of parts that are to be used in new product designs, which is a subset of all existing parts, use this variation. By concentrating on the use of an approved parts list in new products, a company can incorporate highquality, low-cost components into its products.
Divide the number of approved parts in a new product’s bill of materials by the total number of parts in the bill. If there is no approved components list, then the only alternative is to use the set of all existing components from which to select items for the numerator, which will likely result in a higher percentage. The formula is as follows:
$\frac{\text { Number of approved parts in bill of materials }}{\text { Total number of parts in bill of materials }}$
Because a complex product will probably contain one or more subassemblies rather than individual components, one should verify that selected subassemblies are also on the approved parts list; otherwise, subassemblies will be rejected for the purposes of this measurement.
会计代写|会计作业代写ACCOUNTING代考|Bill of Material Accuracy
The engineering department is responsible for the release of a bill of materials for each product that it designs. The bill of materials should specify exactly what components are needed to build a product, plus the quantities required for each part. The logistics staff uses this information to ensure that the correct parts are available when the manufacturing process begins. At least a $98 \%$ accuracy rating is needed for this measurement in order to manufacture products with a minimum of stoppages caused by missing parts.
To calculate the measurement, divide the number of accurate parts (defined as the correct part number, unit of measure, and quantity) listed in a bill of material by the total number of parts listed in the bill. The formula is as follows:
Number of accurate parts listed in bill of materials Total number of parts listed in bill of materials
Although the minimum acceptable level of accuracy is $98 \%$, this is an area where a $100 \%$ accuracy level is required in order to ensure that the production process runs smoothly. Consequently, a great deal of attention should be focused on this measurement.
The timing of the release of the bill of materials is another problem. If an engineering staff is late in issuing a proper bill of materials, then the logistics group must scramble to bring in the correct parts in time for the start of the production process. Measuring the timing of the bill’s release as well as its accuracy can avoid this problem by focusing the engineering staff’s attention on it.
会计作业代写
会计代写|会计作业代写ACCOUNTING代考|PERCENTAGE OF NEW PARTS USED IN NEW PRODUCTS
对于公司的物流人员来说，一个持续存在的问题是工程部门为每个新产品指定的新零件数量。这可能导致需要跟踪的零件数量非常多，这需要额外的采购和材料处理成本。从为整个公司节省成本的角度来看，鼓励工程师设计与现有产品共享组件的产品是非常有意义的。这种方法利用采购和材料处理人员现有工作量的新产品，并具有避免投资新零件库存的额外好处。由于这些原因，新产品中使用新零件的百分比是性能测量的绝佳选择。
将物料清单中的新零件数量除以物料清单中的零件总数。许多公司可能不会在材料清单中包括配件和紧固件，因为他们始终将大量这些物品放在手头，并将它们记入当期费用。如果是这样，计算中包含的零件数量通常会大大减少，从而使测量更容易完成。公式如下：
物料清单中的新零件数量 物料清单中的零件总数
工程师可能会反对使用这种测量方法，理由是它不利于他们找到更可靠和/或更便宜的零件来替换现有组件。尽管该措施可以阻止此类有益活动，但测量系统还可以通过关注产品成本的长期下降或质量水平的提高来避免这个问题。这些测量的组合可以成为工程部门专注于最合适的设计计划的有效方法。
会计代写|会计作业代写ACCOUNTING代考|PERCENTAGE OF EXISTING PARTS REUSED IN NEW PRODUCTS
上述测量的倒数可用于确定新产品中使用的现有零件的比例。然而，正如公式所揭示的，这种测量与逆测量略有不同。已编制将在新产品设计中使用的已批准零件清单（是所有现有零件的子集）的公司使用此变体。通过专注于在新产品中使用批准的零件清单，公司可以将高质量、低成本的组件整合到其产品中。
将新产品的材料清单中批准的零件数量除以清单中的零件总数。如果没有批准的组件列表，那么唯一的替代方法是使用所有现有组件的集合，从中选择分子项目，这可能会导致更高的百分比。公式如下：
物料清单中批准的零件数量 物料清单中的零件总数
因为复杂的产品可能包含一个或多个子组件而不是单个组件，所以应该验证选定的子组件也在批准的零件清单上；否则，出于此测量目的，子组件将被拒绝。
会计代写|会计作业代写ACCOUNTING代考|BILL OF MATERIAL ACCURACY
工程部门负责为其设计的每个产品发布材料清单。物料清单应准确说明构建产品所需的组件，以及每个零件所需的数量。后勤人员使用这些信息来确保在制造过程开始时提供正确的零件。至少一个98%此测量需要准确度等级，以便制造因缺少零件而导致的停工最少的产品。
要计算测量值，除以精确零件的数量d和F一世n和d一种s吨H和C这rr和C吨p一种r吨n在米b和r,在n一世吨这F米和一种s在r和,一种ndq在一种n吨一世吨是按清单中列出的零件总数列在物料清单中。公式如下：
物料清单中列出的准确零件数量 物料清单中列出的零件总数
尽管可接受的最低准确度水平为98%, 这是一个区域100%为了确保生产过程顺利进行，需要精度级别。因此，应将大量注意力集中在此测量上。
物料清单的发布时间是另一个问题。如果工程人员迟到了正确的物料清单，那么物流团队必须争先恐后地及时带入正确的零件以开始生产过程。衡量法案发布的时间及其准确性可以通过将工程人员的注意力集中在它上来避免这个问题。
会计代写|会计作业代写accounting代考 请认准UprivateTA™. UprivateTA™为您的留学生涯保驾护航。
