19th Ave New York, NY 95822, USA

# 信号处理代写signal processing代考|Spectral estimation and modelling

##### 代写数字信号处理signal processing

In comparison, the output viewpoint examines how a single point in the output signal is determined by the various values from the input signal. Just as with discrete signals, each instantaneous value in the output signal is affected by a section of the input signal, weighted by the impulse response flipped left-for-right. In the discrete case, the signals are multiplied and summed. In the continuous case, the signals are multiplied and integrated. In equation form:

$$y(t)=\int_{-\infty}^{+\infty} x(\tau) h(t-\tau) d \tau$$

The convolution integral. This equation defines the meaning of: $y(t)=x(t) * h(t)$.

This equation is called the convolution integral, and is the twin of the convolution sum ) used with discrete signals.shows how this equation can be understood. The goal is to find an expression for calculating the value of the output signal at an arbitrary time, $t$. The first step is to change the independent variable used to move through the input signal and the impulse response. That is, we replace $t$ with $\tau$ (a lower case Greek tau). This makes $x(t)$ and $h(t)$ become $x(\tau)$ and $h(\tau)$, respectively. This change of variable names is needed because $t$ is already being used to represent the point in the output signal being calculated. The next step is to flip the impulse response left-for-right, turning it into $h(-\tau)$. Shifting the flipped impulse response to the location $t$, results in the expression becoming $h(t-\tau)$. The input signal is then weighted by the flipped and shifted impulse response by multiplying the two, i.e., $x(\tau) h(t-\tau)$. The value of the output signal is then found by integrating this weighted input signal from negative to positive infinity.

my-assignmentexpert™ 信号处理signal processing作业代写，免费提交作业要求， 满意后付款，成绩80\%以下全额退款，安全省心无顾虑。专业硕 博写手团队，所有订单可靠准时，保证 100% 原创。my-assignmentexpert™， 最高质量的信号处理signal processing作业代写，服务覆盖北美、欧洲、澳洲等 国家。 在代写价格方面，考虑到同学们的经济条件，在保障代写质量的前提下，我们为客户提供最合理的价格。 由于统计Statistics作业种类很多，同时其中的大部分作业在字数上都没有具体要求，因此信号处理signal processing作业代写的价格不固定。通常在经济学专家查看完作业要求之后会给出报价。作业难度和截止日期对价格也有很大的影响。

my-assignmentexpert™ 为您的留学生涯保驾护航 在信号处理signal processing作业代写方面已经树立了自己的口碑, 保证靠谱, 高质且原创的统计Statistics代写服务。我们的专家在信号处理signal processing代写方面经验极为丰富，各种信号处理signal processing相关的作业也就用不着 说。

• 微分方程 Differential equations
• 递归关系 Recurrence relations
• 变换理论 Time-frequency analysis – for dealing with non-stationary signals [14]
• 时频分析 Transformation theory Time-frequency analysis – for dealing with non-stationary signals
• 频谱估计 Spectral estimation – for determining the spectral content
• 统计信号处理 Statistical signal processing – for analyzing and extracting information based on the stochastic properties of signals and noise
• 线性时不变系统理论和变换理论 Linear time-invariant systems theory and transformation theory
• 多项式信号处理 Polynomial signal processing – analysis of systems related to inputs and outputs using polynomials

## 信号处理代写signal processing代考|power spectral density (PSD)

The power spectral density (PSD) of an ergodic stochastic process $X_{n}$ refers to the distribution of the power of $X_{n}$ across the frequency components of such process. More formally, the PSD of a stochastic process $X_{n}$ is given by the absolute value of the Fourier transform of its autocorrelation function, that is
$$P_{X}(f)=\left|\sum_{\tau=-\infty}^{\infty} R_{X}(\tau) e^{-\jmath 2 \pi f \tau}\right|, \quad f \in[0,1]$$where $R_{X}(\cdot)$ is the ACF of the stochastic process $X_{n}$, and $f$ is the normalised frequency. This relation is also known as the Wiener-Khintchine theorem.

## 信号处理代写SIGNAL PROCESSING代考|t Fourier transform (FFT)

The calculation of $P_{X}(f)$ according to (25) requires complete knowledge of the autocorrelation function of $X_{n}$, however, in real world applications this quantity is approximated based on the available samples, hence, the PSD can only be estimated.

A method to estimate the PSD based on the fast Fourier transform (FFT) is the so-called periodogram, and is defined by
$$\widehat{P}{X}(f)=\frac{1}{N}\left|\sum{n=0}^{N-1} x[n] e^{-j 2 \pi f \frac{n}{N}}\right|^{2}$$
The PSD is estimated at $N$ discrete frequencies, which in terms of normalised frequencies, corresponds to $f=0,1 / N, \ldots,(N-$ 1) $/ N$. For convenience, the sampling interval $T$ is implicitly assumed to be unity.

## 信号处理代写SIGNAL PROCESSING代考|T FOURIER TRANSFORMFF吨

$$\widehat{P} {X} 定义F=\frac{1}{N}\left|\sum {n=0}^{N-1} xne^{-j 2 \pi f \frac{n}{N}}\right|^{2}$$
PSD估计为ñ离散频率，就归一化频率而言，对应于F=0,1/ñ,…,(ñ−1)/ñ. 为方便起见，采样间隔吨被隐含地假定为统一。

## Matlab代写

MATLAB 是一种用于技术计算的高性能语言。它将计算、可视化和编程集成在一个易于使用的环境中，其中问题和解决方案以熟悉的数学符号表示。典型用途包括：数学和计算算法开发建模、仿真和原型制作数据分析、探索和可视化科学和工程图形应用程序开发，包括图形用户界面构建MATLAB 是一个交互式系统，其基本数据元素是一个不需要维度的数组。这使您可以解决许多技术计算问题，尤其是那些具有矩阵和向量公式的问题，而只需用 C 或 Fortran 等标量非交互式语言编写程序所需的时间的一小部分。MATLAB 名称代表矩阵实验室。MATLAB 最初的编写目的是提供对由 LINPACK 和 EISPACK 项目开发的矩阵软件的轻松访问，这两个项目共同代表了矩阵计算软件的最新技术。MATLAB 经过多年的发展，得到了许多用户的投入。在大学环境中，它是数学、工程和科学入门和高级课程的标准教学工具。在工业领域，MATLAB 是高效研究、开发和分析的首选工具。MATLAB 具有一系列称为工具箱的特定于应用程序的解决方案。对于大多数 MATLAB 用户来说非常重要，工具箱允许您学习应用专业技术。工具箱是 MATLAB 函数（M 文件）的综合集合，可扩展 MATLAB 环境以解决特定类别的问题。可用工具箱的领域包括信号处理、控制系统、神经网络、模糊逻辑、小波、仿真等。